NOTE: Unless a question states otherwise, assume the operation is conducted under CASA’s standard RPA operating conditions.
- You plan to launch and operate an RPA from a moving vehicle on a quiet rural road during daylight. Which statement is correct?
- operation is prohibited
- allowed only if the vehicle is travelling under 40 km/h
- allowed if you meet all standard conditions (e.g. maintain VLOS and do not create a hazard)
- RPA must be fitted with ADS‑B
- You are flying a 1 kg RPA 0.6 nm from a hospital helicopter landing site (HLS). When is this permitted?
- only with CASA approval
- only with a RePL
- only below 45 m AGL
- only when no helicopter is arriving, departing or operating to or from the HLS
- A bushfire response begins about 1 km from your location after you have launched. What must you do?
- continue if below 45 m
- hold position 60 m from the scene
- land as soon as safely possible unless operation is permitted by the emergency agency
- continue if using a strobe
- On sloping terrain, from where is the 120 m (400 ft) height limit measured?
- the highest obstacle nearby
- the pilot’s position
- the ground directly beneath the RPA
- the lowest terrain in the area
- You plan a façade inspection 2.0 nm from a controlled aerodrome. Your team proposes switching to a 230 g micro RPA to conduct the flight without an approval. What is correct?
- switching to micro removes all airport restrictions
- a micro may fly within 3 nm, up to 45 m, but not inside the airport boundary or in the approach/departure paths
- a micro may fly anywhere within 3 nm if a spotter is used
- CASA approval is always required within 3 nm, regardless of weight
- Which activity can be conducted without a ReOC if you hold RPA operator accreditation and comply with the standard conditions?
- commercial work with an RPA ≤ 2 kg (excluded category)
- BVLOS pipeline inspection in Class G
- flying over people with a sub‑250 g RPA
- night filming with anti‑collision lighting
- You intend to fly inside a charted Danger Area. What approval is required?
- CASA approval
- controlling‑authority approval
- CASA and ATC approval
- none; you must understand the hazard and avoid hazardous operations
- If your planning tools conflict, what should you rely on?
- the less restrictive app
- CASA‑verified app
- published aeronautical information or a valid authorisation; apps provide guidance
- manufacturer geofencing rules only
- What is the minimum horizontal distance required from people not involved in the operation?
- 20 m
- 30 m
- 5 m
- 15 m
- Can you fly your RPA in cloud if you use a visual observer to maintain lookout?
- yes, if the observer can see the RPA
- yes, if using a strobe and a spotter
- no, VLOS requires the pilot to maintain unaided visual contact with the RPA
- no, unless the RPA is 250 g or less
- You intend to fly over a vessel at sea. What is the relevant operational constraint?
- a blanket prohibition on flying over vessels
- the rules prohibiting flying over people and the requirement not to operate in a way that creates a hazard
- a 45 m altitude cap over water
- consent of the master of the vessel
- A mapping job with a 15 kg RPA in open country will run at about 700 m range. Which statement is correct?
- 700 m automatically requires EVLOS
- whether EVLOS/BVLOS approval is required depends on your ability to maintain VLOS
- anything beyond 500 m is BVLOS
- EVLOS may be conducted under the standard operating conditions if a spotter is used
- You plan to survey a powerline for a power company using your 10 kg RPA. The powerline runs through several parcels of separately owned private property. Which statement
is correct?- if you have completed accreditation and obtained consent from each landowner, you can operate as an excluded RPA operation
- you must operate under a ReOC and hold a RePL
- you do not need accreditation or to operate under a ReOC as the operation is overprivate property
- if you have a RePL you can conduct the operations as an excluded operation without landowner consent
- You want to change to a different propeller or battery model than the one originally specified. What is required for a ReOC operation?
- nothing, components are interchangeable
- CASA notification for each change
- manage the change through your CASA‑approved maintenance/airworthiness/risk procedures (documented practices and procedures)
- only a test flight
- Can a ReOC operator fly at night without applying for a new, operation‑specific approval?
- no, always case‑by‑case
- yes, under CASA Instrument 01/17, if the operator meets its conditions (training, records, risk assessment, documented procedures)
- yes, if the RPA is ≤ 2 kg
- only with an AROC
To view the answers, go to the next page using the page navigation buttons below.



